# Wireguard

Client Wireguard : [https://www.wireguard.com/install/](https://www.wireguard.com/install/)

![embedded-image-fila1byi.png](https://wiki.lebeausimon.com/uploads/images/gallery/2026-02/embedded-image-fila1byi.png)

Donner le nom Wireguard

Entrer le port 13231

Faire OK

![Screenshot_2.jpg](https://wiki.lebeausimon.com/uploads/images/gallery/2026-04/screenshot-2.jpg)

IP / Addresses / +

![embedded-image-sqy4wjc9.png](https://wiki.lebeausimon.com/uploads/images/gallery/2026-02/embedded-image-sqy4wjc9.png)

Menu IP/firewall/filter rules/+

![embedded-image-nssm7lop.png](https://wiki.lebeausimon.com/uploads/images/gallery/2026-02/embedded-image-nssm7lop.png)

Monter la règle dans la liste en #2 ou #3

Ajouter le wireguard dans l’address list pour l’accès à Winbox over VPN

![embedded-image-pv8eorb8.png](https://wiki.lebeausimon.com/uploads/images/gallery/2026-02/embedded-image-pv8eorb8.png)

Menu Wireguard/peer/+

![Screenshot_3.jpg](https://wiki.lebeausimon.com/uploads/images/gallery/2026-04/xXLscreenshot-3.jpg)

Dans la configuration du client Wireguard Windows, ajouter un tunnel vide

\[Interface\]

Address = 10.100.0.101/32 (l'adresse du peer de la personne qui se connecte)

DNS = 10.0.0.1 (adresse du routeur Microtik local)

\[Peer\]

Publickey = Publique Key du routeur :

AllowedIPs = 192.168.1.0/24 (Reseau local du client)

Endpoint = fizzanoelectrique.kpi10.com:13231 (DNS du client)

PersistentKeepalive = 10

Exemple :

 ![Screenshot_1.jpg](https://wiki.lebeausimon.com/uploads/images/gallery/2026-04/screenshot-1.jpg)