Moneris DX8000 & PAX A920 - Direct (Counter Integration)

*Procédure copier du Zoho de Cluster 
 
 NOTE: POS must be on 6.10.0.0 minimum for integration to work.  
 Works with DX8005 also! It has been tested. 
 
 Open the  Moneris  GO App 
 
 
 
 If it's Not there, you can install it from the PAXSTORE 
 
 
 
 On this page, the client must enter their  Moneris  Portal Credentials in order to Access General Settings, Tips settings or Standalone mode. 
 This will be their email and password they set up via the "Let's Get Started" email sent to them by  Moneris .  
 
 
 
 It'll bring you to this Page where they can make payments in Standalone mode, Press the 3 Lines on top left. 
 
 
 
 Press Settings 
 
 
 
 From here, you can setup Receipt, Tips, Tax and many settings. 
 Press Sync once completed. 
 
 
 
 Once done, Sign Out 
 
 
 
 
 On this screen, press the X. If there's no X, press the Circle Home Button at bottom of screen. 
 
 
 
 Open the Go Integrated App 
 
 
 
 From this screen, swipe from Left to Right in order to access Quick Service Settings 
 
 
 Default Password is 212324 
 
 Press Settings 
 
 
 
 Set Operational Mode to Direct 
 
 
 Then Press Wifi 
 Make sure you're Connected to the same Wifi as the POS 
 
 
 
 Press and hold on the Wifi Name and tap Modify Network 
 
 
 
 Check Advanced Settings, Scroll down, and set IP Settings to Static 
 
 
 
 Configure the Terminal's IP, Gateway, DNS, etc 
 And Save 
 
 
 
 If back on this screen, Press Save 
 
 
 
 After tapping SAVE, you may see this screen:  
 
 
 The client will need to enter their  Moneris  MID.  
 If they do not have it, you will need to contact  Moneris  with the client.  
 
 You should be back to the Quick Service Page 
 
 
 
 On POS Settings, Device 
 Set  MONERIS  Device, Set IP of the Terminal 
 
   
 
 Test by sending a Payment 
 If POS freezes, reboot and it should be good to go!